October 7, 2008

Posture

I made a monitor stand! I came across a DYI monitor stand via stumble upon about 6 months ago and have been thinking about it since. The author paid for a fabricated stand and a custom cut steel plate with another custom cut glass plate on top. His TCO was about $125. It looked ultra cool.

I do computer work for Aloha Machine & Welding (best name evar), a local machine shop I considered asking them to cut me what I need in a work exchange, but decided I wanted to be more integral to the process and I didn't really want to spend much money on this, I don't have a lifestyle that dictates form over function.

I took measurements of what I wanted covered and headed to the hardware store. I bought a board, had it cut and came home to paint. I had some spray paint leftover from the previous painting projects: keyboard and mouse. I managed 2 coats of blue on the base before I ran out.
2 x steel cans got 1 coat of white before it ran out and the other two ended up getting several coats of black. I gave the blue base 3 coats of clear finish.

I used a liquid nails equivalent and a real nail fasten them in. I was less concerned about exact measurements but everything is more or less where is should be. My monitor now sits 5" above where it was and I'm sure my neck and back will thank me for it shortly.


Parts:
Board: $8. Still have 3/5ths of the board left
steel cans: free
spray paint: free
4 x nails: free
Post a Comment